SSLVPN Client Address Range section: . NetExtender is an SSL VPN client for Windows, Mac, or Linux users that is downloaded transparently and that allows you to run any application securely on you company’s network. Where can I see the active SSL-VPN user status on SonicWall Network Security appliance. In the advanced VPN settings I was able to configure the firewall to assign the Sonicwall's IP as the DNS server to the clients, but that did not resolve the problem.
A number of VPN clients is included with each appliance and additional connections are licensed on a per-concurrent-connection basis.
But these DNS addresses don't appear to be working for the remote clients.I do not have another DNS server setup on the network.Track users' IT needs, easily, and with only the features you need.Is there something in the firewall that could be blocking VPN DNS queries to itself? Then use nslookup to see if your server on the remote site will resolve [example: server1]. SSL VPN access must be enabled on a zone before users can access the Virtual Office web portal. I am now able to hit the SonicWall page while connecting to the VPN but I am now getting the "Administrator login is not allowed" page. All clients (local and VPN) are getting the address of the new DNS server.For all local clients it appears to be working - they can all all resolve each other by hostname.I've got a VPN setup on my TZ350 firewall. I can ping to it however.When you setup the DHCP on the Sonicwall, you can tell it the remote IP address of the DNS server on the other side of the VPN. VPN Clients Owners of SonicWall UTM devices may connect securely into their network using IPSec or SSL technology to allow remote working or resource sharing with clients and suppliers. Answer: The SSL VPN > Status page displays a summary of active NetExtender sessions, including the name, PPP IP address, physical IP address, login time, length of time logged in and logout time. NSLOOKUP can be very helpful in showing what the PC is trying and what response it's getting back.The help desk software for IT. "Note that you are currently logged in to the Sonicwall as a VPN Client user and login here is only allowed for management of the appliance. You can also tell DHCP to set the local domain name for the PCs to use [example: mycompany.local or local.mycompany.com].To make sure DNS is working correctly, from one of the PCs that is remote to the DNS server, open either CMD prompt or powershell and run "nslookup". Free.Any thoughts on how I can resolve this?Under VPN>>Advanced there is a setting configuration for internal DNS, but you would need a dns server. However, it still cannot resolve the hostname of our file server (which happens to be the DNS server as well). The VPN user am logging with is a member of that group. Connecting to a Sonicwall SSL VPN using Windows Without Needing the Sonicwall NetExtender Client. Enable your employees who work remotely with the protection of advanced Sonicwall SSL VPN connections.