The ATS incorporates the best parts of a tube or plate device and a figure 8 with 'hyper-horns' into one compact, durable frame.Rock Exotica Mini-eight features side ears that let you easily vary friction, and is super compact - great for an emergency descender. Low friction rope position. To avoid the serious risk of cross loading the carabiner, make sure the 8 ring isn’t stuck around the gate when you weight the system, and maintain a constant load on the system.A Figure 8 device can easily be locked off while rappelling by moving the rope in your brake hand across your body so it crosses the uphill rope. 39. SMC tests their equipment in the user configuration which gives very accurate ratings. … * WLL : 700 lbs. This may be the case if you are trying to add more control into the system, such as when performing rescue work. Dimensions: 5.5" x 2.9" Wgt : 4 oz. A figure-eight descender. ”The Scarab Rescue Tool is a stainless steel tool that excels at easily controlling heavy rescue loads, pick-offs, twin rope systems, and other rescue techniques. 3 Tips Regarding How to Use a Figure 8 Descender. Would recommend.”Weight: 7.5 oz (213g), Dimensions: 5" x 3.7" x 0.375", Max. The smaller size makes it a bit slower to rig on kernmantles, but Velocity and other 7/16" 24-strands rig up just fine, even with gloves. The Climbing figure 8 is made of a hot-forged aluminum alloy and is of high durability.
With a little modification, you can increase or decrease friction, stop completely, and even disconnect from the rope without unlocking the carabiner! You can tie a large knot in the rope instead of using an Eight, but the stress in the system will make the knot extremely difficult to untie. Well, it’s been done for a long time! I am on a wildlife snag creation project for U.S.F.S.
A few caveats—it only works with flat faced Figure Eights like …
The biggest advantage to a Rescue 8 is that you can adjust the friction level mid-rappel by adding an extra wrap around the horns.In some instances, you may want to actually increase the friction on the 8 ring. This unique device allows multiple friction settings on rappel as well as auto lock-off belay options. This can be very helpful if you need to untangle the rope below you, or stop for any reason, and this is a capability a regular ATC doesn’t have. To hang the fabrics from the ceiling you need a carabiner and a hook for the ceiling as well as a climbing figure eight. Add to Wish List. They perform largely the same job, but also include extra features designed for specific tasks (when carrying the Kong Oka, I always worry I’ll accidentally end up with an appendectomy! Low friction rope position. Then, once on the ground, you can pull the other strand of rope (the side with the 8 block) and pull the rope. One advantage of a Figure of Eight rappel device is that it can be locked off on the rope, a useful trick for some circumstances. During a rebelay, you cannot lock your descent temporarily. Multiple loops will heat up the device a lot quicker, but will really increase the friction for heavier loads.We went into detail about the setup for the regular rappel at the beginning of this article. It provides just the right friction with one wrap over the top ear. An 8 block is used to create a ‘stop’ in the rope on one side of the anchor that can’t pass through a quick link so you can rappel down a single strand of rope. While we provide useful information about how to perform these activities, we recommend that you seek out professional training certifications before guiding yourself.This site is owned and operated by In Our Lovely Desert, LLC.Most of this has been discussed in detail above; however, I wanted to touch on the key differences between the two devices to help you select which is better for you. Compatible with ropes up to 12.7mm (1/2"). The best days are when my wife and baby daughter come along...still trying to figure out canyoneering with her though!Currently based out of Phoenix, Arizona.Can you Belay with a Figure 8?